- Posts: 32
- Thank you received: 1
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
D4 7U Cutting edges part numbers
16 years 2 months ago #20716
by dannygcat
D4 7U Cutting edges part numbers was created by dannygcat
Does anyone have the part numbers for the D4 7U straight blade cutting edges? Also what is the bolt number? Thank you.
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16724
- Thank you received: 820
16 years 2 months ago #20726
by Old Magnet
Replied by Old Magnet on topic D4 7U Cutting edges part numbers
What is the blade serial number??? Tag or stamped on the back right hand side near the top of the blade.
Please Log in or Create an account to join the conversation.
16 years 2 months ago #20731
by Willie
Replied by Willie on topic D4 7U Cutting edges part numbers
That would be a 4A???? the only 60 in.ga. straight blade made in USA for the 7U. - Corner bits 9F7073(r.h.heavy duty)- 6F7074(l.h.heavy duty) or 7F7221(r.h.)-7F7222(l.h.) - Gutting edge 3F6575 or 6F1347(heavey duty) - Bolts 3F5108
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16724
- Thank you received: 820
16 years 2 months ago #20735
by Old Magnet
Replied by Old Magnet on topic D4 7U Cutting edges part numbers
The later 67E series straight blade will also fit the 7U.
Please Log in or Create an account to join the conversation.
16 years 2 months ago #20772
by OzDozer
Replied by OzDozer on topic D4 7U Cutting edges part numbers
The three US-built, 4S (straight) blade models for the D4 are .. 2A1001-up, 4A2001-up, and 67E0001-up. These translate into modern Cat part numbering as 02A01001-up, 04A02001-up and 67E00001-up ..
Please Log in or Create an account to join the conversation.
16 years 2 months ago #20799
by Willie
Replied by Willie on topic D4 7U Cutting edges part numbers
The 2A was for a 6U not a 7U and the 67E was first made 20 yrs after the last 7U was made
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16724
- Thank you received: 820
16 years 2 months ago #20800
by Old Magnet
Replied by Old Magnet on topic D4 7U Cutting edges part numbers
The 67F1-up and 67E1-up are narrow and wide gage blades used on the 39A and 40A D4's starting 1959.
Please Log in or Create an account to join the conversation.
16 years 2 months ago #20807
by Willie
Replied by Willie on topic D4 7U Cutting edges part numbers
Show me where the guy said he had a 39A or 40A, what I read says D47U straight blade. It may have a toolbar blade on it. Sure the others will fit it and about 50 others will fit it too, but only 1 made by Cat for the D47U
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16724
- Thank you received: 820
16 years 2 months ago #20814
by Old Magnet
Replied by Old Magnet on topic D4 7U Cutting edges part numbers
I'd be interested in knowing about that other 50 that interchange.
Please Log in or Create an account to join the conversation.
Time to create page: 0.182 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
support@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N