ACMOC
Login
ACMOC
Discussion
Pre Work Dirt Moving Needed Before Tulare

Pre Work Dirt Moving Needed Before Tulare

Showing 1 to 10 of 21 results
1
7upuller
Topic Author
Offline
Deceased
Send a private message to 7upuller
Posts: 3,737
Thank you received: 0
Hey Dirt Stiffs,

Garlic Pete has Challanged Me to come down and help move some dirt to get ready for Tulare Show...

Objective;
Loose a 8' high, 26' wide, 550' long pile, along with another smaller pile. Let's assume 2500 cyds and bury it then cover with good dirt.

Plan;
On April 1st, I will be a Fool... Hahahaha... I'm heading to Tulare with some Scrapers. April 1-3 we are moving Dirt. Pete's bringing his Dw-21, a 14-a push cat, and a water truck. I'll have a 36-a/435, 17-a/70, 9u/60 Scraper Combinations. I'll bring down a Dw-20. Pete, it's a second one, a surprise I haven't talked about. I need to see if the Dw-20 in Santa Margarita needs to come over or not. OilSlick, can you bring a Push Cat? Scraper? Paso Bob, can you bring a Push Cat? Then Oil Slick can Scraper up?

Mission;
First week end...
On April 1-3 we need to Big Dig, 300' long x 100' wide x 4' deep. That's 4444 cyds. We can spread 2000 cyds around the area 4" thick. We will stock pile 2400 cyds.

April 9th...
Sutter Truck Show, I'm bring 3 tanks :usa2:and trucks...

April 15-17
Tractor Show Week End...
We will pick up berm and lay it out 2' thick in bottom of dig pit. Then we can pick up the 2400 cyds stock piled and put on top.

It's gonna be a blast... Come scraper up, let's get er done!!!:usa2:
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 7:29 AM
Oil Slick
Offline
Send a private message to Oil Slick
Posts: 1,702
Thank you received: 0
My 17A is ready to go. HO is almost ready to go. I haven't finished plumbing the tilt cylinder. I can drop the blade and use it to pull a scraper.
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 7:44 AM
7upuller
Topic Author
Offline
Deceased
Send a private message to 7upuller
Posts: 3,737
Thank you received: 0
Reply to Oil Slick:
My 17A is ready to go. HO is almost ready to go. I haven't finished plumbing the tilt cylinder. I can drop the blade and use it to pull a scraper.
Hey D4e,

We need you and your 9u/60 set up.
Can you come help us please???
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 8:29 AM
Deas Plant.
Offline
Member
Send a private message to Deas Plant.
Location: Currently - DowNunda.
Posts: 6,664
Thank you received: 19
Reply to 7upuller:
Hey D4e,

We need you and your 9u/60 set up.
Can you come help us please???
Hi, Glen.
I'm currently over here - look down - but I'll be over there - look UP - by the time that rolls around. Would anybody mind very much if I came along to get in the way?

Just my 0.02.

You have a wonderful day. Best wishes. Deas Plant.

Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 8:36 AM
Oil Slick
Offline
Send a private message to Oil Slick
Posts: 1,702
Thank you received: 0
Reply to Deas Plant.:
Hi, Glen.
I'm currently over here - look down - but I'll be over there - look UP - by the time that rolls around. Would anybody mind very much if I came along to get in the way?

Just my 0.02.
[quote="deas plant."]would anybody mind very much if i came along to get in the way?

Just my 0.02.[/quote]

yes!!! Lmao
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 8:47 AM
Deas Plant.
Offline
Member
Send a private message to Deas Plant.
Location: Currently - DowNunda.
Posts: 6,664
Thank you received: 19
Reply to Oil Slick:
[quote="deas plant."]would anybody mind very much if i came along to get in the way?

Just my 0.02.[/quote]

yes!!! Lmao
Hi, Oil Slick.
And if I promise not to get in the way?????????????

A kew-ree-yuss mind would like to know. (And if you still say, "No", I Might hafta go to a 'higher power'. LOL.)

You have a wonderful day. Best wishes. Deas Plant.

Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 8:51 AM
7upuller
Topic Author
Offline
Deceased
Send a private message to 7upuller
Posts: 3,737
Thank you received: 0
Reply to Deas Plant.:
Hi, Oil Slick.
And if I promise not to get in the way?????????????

A kew-ree-yuss mind would like to know. (And if you still say, "No", I Might hafta go to a 'higher power'. LOL.)
Hey Deas,

OilSlick had spoken... Hahahaha
Oh boy, I can see it now... It's gonna be fun. I'm sure there is gonna be plenty of tractors to play with.

Deas,
Your first mission is to get a third valve on the D6c 74-a and put new hydraulic lines on the Ateco Scraper. You've got a week to get it Tulare Ready...

OilSlick,
You get the Fleet of 14-a's ready. Don't forget about the push block. It's in route...

OldIronHabit,
If you can work you delivery around the 1st of April, you can witness us all acting like Fools...

Jan,
You better come help too. Bring some rope in case we need to tie up Deas and OilSlick... Hahaha
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 9:37 AM
7upuller
Topic Author
Offline
Deceased
Send a private message to 7upuller
Posts: 3,737
Thank you received: 0
Reply to 7upuller:
Hey Deas,

OilSlick had spoken... Hahahaha
Oh boy, I can see it now... It's gonna be fun. I'm sure there is gonna be plenty of tractors to play with.

Deas,
Your first mission is to get a third valve on the D6c 74-a and put new hydraulic lines on the Ateco Scraper. You've got a week to get it Tulare Ready...

OilSlick,
You get the Fleet of 14-a's ready. Don't forget about the push block. It's in route...

OldIronHabit,
If you can work you delivery around the 1st of April, you can witness us all acting like Fools...

Jan,
You better come help too. Bring some rope in case we need to tie up Deas and OilSlick... Hahaha
Hey Team,

I need help on this mission. Let's have fun. I need a few more tractors and good hands to come help. It's gonna be fun. Anyone who wants to come help or just watch is welcome.
Glen
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 9:56 AM
Oil Slick
Offline
Send a private message to Oil Slick
Posts: 1,702
Thank you received: 0
Reply to 7upuller:
Hey Team,

I need help on this mission. Let's have fun. I need a few more tractors and good hands to come help. It's gonna be fun. Anyone who wants to come help or just watch is welcome.
Glen
Pops, my bubbly TUGNOT has logged many hours on my 17a and scraper. If he's ready this maybe he'll come up and put some more hours on it. You got a scraper for me to pull with my 2U?
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 10:07 AM
7upuller
Topic Author
Offline
Deceased
Send a private message to 7upuller
Posts: 3,737
Thank you received: 0
Reply to Oil Slick:
Pops, my bubbly TUGNOT has logged many hours on my 17a and scraper. If he's ready this maybe he'll come up and put some more hours on it. You got a scraper for me to pull with my 2U?
Hey OilSlick,

We can take the 70 down for you. I'll bring a D7-3t dozer as back up push cat, unless you get the 14-a's up by then. Yes, let's plan it that way.:usa2:

Hey Garlic and B4D2,
We need some new icons along with the smiley faces... You know, some dozers, scrapers, blades... Hahahaha that way I don't have to spell it out all the time. I can post a Push Cat behind a Scraper...
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 10:17 AM
d4e
Offline
Member
Send a private message to d4e
Posts: 488
Thank you received: 0
Reply to 7upuller:
Hey OilSlick,

We can take the 70 down for you. I'll bring a D7-3t dozer as back up push cat, unless you get the 14-a's up by then. Yes, let's plan it that way.:usa2:

Hey Garlic and B4D2,
We need some new icons along with the smiley faces... You know, some dozers, scrapers, blades... Hahahaha that way I don't have to spell it out all the time. I can post a Push Cat behind a Scraper...
7upuller I can come up April 1-3 . I have already committed to the April 9 Sutter truck show. I will bring the D6 and scraper up Aoril 1-3
Please log in or create an account to join the conversation.
Mon, Mar 14, 2016 10:57 AM
Showing 1 to 10 of 21 results
1
YouTube Video Placeholder

Follow Us on Social Media

Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.

Upcoming Events

Chapter 2 The Link Club's AGM

Chapter Two

| Faulkner Farm, West Drove, Wisbech, Cambridgeshire, PE14 7DP, UK

HAMILTON PASTURAL MUSEUM

Chapter Nineteen

| Cnr Hiller Lane and Ballarat Road, Hamilton, Vic, 3300

RUSSELL SAYWELL WORKING DAY

Chapter Two

| Pitt Farm, Little Paxton, St Neots, Cambridgeshire, PE19 6HD, UK

10th Annual Best of the West

Chapter Fifteen

| Historic Santa Margarita Ranch, 20000 El Camino Real, Santa Margarita, CA 93453, USA
View Calendar
ACMOC

Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301

[email protected]

Terms & Privacy
Website developed by AdCo

Testimonials

"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N

Join Today!